Luminex(R) II README
Version 23666
Released: 11-1-2023

To download and install the Version 23332 Update
for the Luminex II do the following:
1) Click the Luminex II Build #23332 download link available at
   https://www.stenograph.com/writer-downloads.
2) Save the download file to your computer.
3) Connect the USB cable between your Luminex II 
   and your computer. Turn on the writer if it is not
   already on.
4) Double click the update file you downloaded to start the
   update process.
5) Follow the instructions in the update program.
6) Once you have successfully updated your Luminex II,
   close the update program.

This README can be printed by selecting the File menu
and then selecting Print.

For complete Luminex II software, hardware and operations
information, please view the Luminex II User Guide. 
Visit - http://www.stenograph.com/manuals-download -
to download the Luminex II User Guide.

LUMINEX II README INFORMATION
            -- o0o --
Version 23666 - Released 11-1-2023
*Made changes to bluetooth to support using the
 Stenograph Bluetooth program which replaces BlueSoleil.
*Made changes to support a new battery. 

            -- o0o --
Version 23332 - Released 9-17-22
*Made internal changes to improve Wifi communication with
 CATalyst.
*Made general stability improvements that are transparent
 to the user. 
*Made changes to the software so all Luminex machines use
 the same build of software instead of requiring multiple 
 builds. 

            -- o0o --
Version 19827 - Released 10-15-20
*Fixed a rare issue that could prevent audio playback during
 a job.

*When attempting to use an SD Card greater than 32GB in the
 Data and/or Backup card slots, a message will now display
 letting the user know the maximum SD Card size is 32GB.

*The creation of internal WiFi logs has been removed. This
 is transparent to the user.

*The WiFi Log option, which is no longer needed, has been
 removed from the WiFi Options menu.

*Made general stability improvements that are transparent
 to the user.


            -- o0o --
Version 19660 - Released 06-15-20
*Made changes to internal logging to fix a potential decline 
 in performance on Luminex CSE model writers using build 19500.  
 The issue has been corrected."  


            -- o0o --
Version 19500 - Released 06-09-20
*Made internal changes that are transparent to the user
 to prevent the occurrence of a rare freeze.

*Made changes to log files that are transparent
 to the user.

*Fixed a rare crash that could happen when a WiFi SSID name is 32
 characters long.

*In the event the LCD detected down message is visible, the 
 message has been changed to let the user know touching the
 screen or writing will now clear the message. The new message is: 
 "LCD Detected Down. Begin writing or touch the screen to clear 
 this message."

*Made software stability improvements that are transparent to
 the user.

*Attempting to use the Configure function to search for 
 available Bluetooth connections sometimes incorrectly 
 displayed an "Unable to perform request" message.
 This has been corrected.

*When using the touchscreen to turn off the writer, 
 it was possible for the screen to turn off, but for the
 writer to not truly be turned off.  This has been corrected.


            -- o0o --
Version 19209 - Released 01-09-20
*Made a change to internal log information that
 is transparent to the user.

*Made a change to the detection of the screen lid
 being open or closed that is transparent to the user.


            -- o0o --
Version 19186 - Released 12-12-19
*Made a change to more accurately detect if the
 screen lid is open or closed.

*Made improvements to Bluetooth communication when
 the writer leaves Bluetooth connection range and
 reenters Bluetooth connection range.

*Prevented the cause of a rare error involving the
 simultaneous use of a touch sensor button and the
 Number Bar.

*Made stability and diagnostic log improvements that
 are transparent to the user.

*Fixed a rare issue that could cause the writer to
 reset when you are making individual key adjustments
 in the Adjust Keys screen.

*Fixed an issue that could cause the function sensor 
 buttons and/or touchscreen menu options to not work if 
 the touchscreen was pressed or a wiping motion was 
 made on the touchscreen while the writer was in the 
 process of powering on.


            -- o0o --
Version 18943 - Released 08-12-19
* Version 18943 is the initial release version of
  software for the Luminex II writing machine.